
Brimob Tactical Car
Automotive and vehicles · DKI Jakarta · 2023
Project overview
Brimob Tactical Car in DKI Jakarta is a MAKEPaint project reference for machinery and vehicle finishes.
- Location
- DKI Jakarta
- Sector
- Automotive and vehicles
- Project year
- 2023
- Duration
- 12 weeks
- Area
- ± 2,000 m²
- Surfaces
- Machinery and vehicles
- MAKEPaint products
- 3 products
Project photos
Photos from the project site, by coated surface.
Challenge, solution and result
The conditions on site, the coating system chosen, and how the work turned out.
Challenge
Machinery and vehicles need a glossy, even finish that resists scratches and is done quickly so they can go back to work.
Solution
MAKE 041 and MAKE 091 industrial paints and MS41 refinish, spray applied, for an even, durable finish.
Result
An area of about 2,000 m² was coated in 12 weeks. The thickness of every coat was checked on site before handover.
Coating system specification
The MAKEPaint products for each surface, from primer to finish, with the dry film thickness the application guide sets.
| Function | Product | DFT |
|---|---|---|
| Machinery and vehicles | ||
| Primer | PrimerMAKE 041Epoxy Primer | Per TDS |
| Finish | FinishMAKE 091Polyurethane | Per TDS |
| Finish | FinishMAKE MS41MAKE MS41 | Per TDS |
Project schedule
The stages of the work by week, from the site survey to handover.
Survey and surface tests
Week 1
The technical team checks the surface, the exposure and the area on site.
System recommendation
Weeks 1–2
The coating system and colors are agreed, with samples and technical data sheets.
Production and delivery
Weeks 2–3
The material is made and shipped from the MAKEPaint plant in Cikarang.
Preparation and application
Weeks 3–11
The surface is prepared, then primer, intermediate and finish coats go on.
Inspection and handover
Week 12
Coat thickness and adhesion are checked before the work is handed over.
Survey and surface tests
Week 1
The technical team checks the surface, the exposure and the area on site.
System recommendation
Weeks 1–2
The coating system and colors are agreed, with samples and technical data sheets.
Production and delivery
Weeks 2–3
The material is made and shipped from the MAKEPaint plant in Cikarang.
Preparation and application
Weeks 3–11
The surface is prepared, then primer, intermediate and finish coats go on.
Inspection and handover
Week 12
Coat thickness and adhesion are checked before the work is handed over.
Project video
Coating work on site, from surface preparation to the final coat.
Related documents
Brochures and the catalog for the products used on this project.

Have a similar project?
Tell our team about your surface conditions and requirements.
or email sales@makepaint.co.id





